home *** CD-ROM | disk | FTP | other *** search
/ Cream of the Crop 3 / Cream of the Crop 3.iso / comm / ter12b.zip / TER12B._XE / MANUAL.EXE / TERMINAT.HLP < prev    next >
Text File  |  1993-12-01  |  26KB  |  597 lines

  1. ^h
  2. ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄   ▄▄▄▄▄▄▄▄▄▄▄    ▄▄▄▄ ▄▄▄▄▄▄    ▄▄▄▄▄▄  ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
  3. ░                     ▀▄ ░          ▀▄  ░  █ ░     ▀▄  ░     ▀▄░             █
  4. ▀▀▀█  █▀▀▀▀▀▀█▀▀▀▀▀▀▀▄  ▓▀▀▀█▀█  █▀▄  █ ▀▀▀█ ▀▀▀█▀▄  █ ▀▀▀█▀█  █ █  █▀▀▀▀▀█▀▀▀
  5.    ░  █ ░    ▓  ░▀▀▀▀▀ ▄▀░  █ ░  █ ░  █ ░  █ ░  █ ░  █ ░  █▄░  █ ░  █░    ▓
  6.    ░  █ ░  █▀▀  ░    ▄▀  ░  █ ░  █ ░  █ ▒  █ ▒  █ ▒  █ ▒  █    █ ░  █▒  █▀▀
  7.    ▒  █ ▒  ▀▄▄▄ ▒  ▄▄ ▀▄ ▒  █ ▒  █ ▒  █ ▒  █ ▒  █ ▒  █ ▒  █▀▒  █ ▒  █▒  ▀▄▄▄▄▄
  8.    ▓  █ ▓     ▓ ▓  ▓ █ ▓ ▓  █ ▓  █ ▓  █ ▓  █ ▓  █ ▓  █ ▓  █ ▓  █ ▓  █▓       ▓
  9.    ▀▀▀▀ ▀▀▀▀▀▀▀ ▀▀▀▀ ▀▀▀ ▀▀▀▀ ▀▀▀▀ ▀▀▀▀ ▀▀▀▀ ▀▀▀▀ ▀▀▀▀ ▀▀▀▀ ▀▀▀▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀
  10. ^n
  11.                              ^bT E R M I N A T E^n
  12.                              ^m─────────────────^n
  13.  
  14.                                Version  1.2
  15.  
  16.                       Copyright 1992-93 by Bo Bendtsen
  17.  
  18.                             All Rights Reserved
  19.  
  20.  
  21.  Welcome to the Terminate On-Line Manual. This Manual is designed so
  22.  anyone can add comments or even change the language as easily as possible.
  23.  You may change the Help files for your own purposes, but you are NOT
  24.  allowed to distribute any modified files. If you do translate files into
  25.  your own language, please send a copy to me or to a Registration Site so
  26.  other users can benefit from your work.
  27.  
  28.  In almost every menu you are able to press F1 to get help for the current
  29.  menu. If you want to change the help file, you can press E to edit the
  30.  file directly. To speed things up, you can press F and enter a keyword to
  31.  find. This function will only search forwards - so if you want to search
  32.  the entire helpfile, you must press HOME first. I have chosen to use this
  33.  form of On-line Help, because then the entire manual can be loaded
  34.  directly from the menus where it is needed. You can run MANUAL.EXE, which
  35.  will compile all the help files into one big manual without colorcodes,
  36.  and then you can print it out. In this way you don't have to waste disk
  37.  space on both help files AND a manual since you can always delete
  38.  TERMINAT.DOC and run the MANUAL.EXE program later.
  39.  
  40.  ^hTERMINAT ?^n will give you a list of all available parameters.
  41.  
  42.  You are now in terminal mode and have configured the system.
  43.  If you have not configured Terminate, press Alt-O now. Remember that you
  44.  can press F1 in any menu where you need more help.
  45.  
  46.  ^hEditing input fields^n
  47.  
  48.   When you start editing a field/number/string, you can modify the previous
  49.   contents by first pressing cursor left/right. The field will then change
  50.   colour and you can append/insert new characters. If you just start typing
  51.   immediately, the field will be blanked and the cursor placed on position 1.
  52.   Terminate will always remember the last 16 fields you have typed. That way,
  53.   if you type something new in a field and want to change it back, just edit
  54.   the field again and press ^hCURSOR-UP^n or DOWN and you are now able to
  55.   cycle between the last 16 fields. In every input field where all characters
  56.   are allowed, you can also press ^hAlt-A^n and the character selector will
  57.   appear, showing all characters from #0..#255.
  58.   If you want a return sign, just move to #13 and press return. To see all 16
  59.   strings, press ^hAlt-F9^n from terminal mode.
  60.  
  61.   The following section outlines all Terminal mode commands and gives some
  62.   useful tips and tricks. We advise you to read all of this if you are not
  63.   familiar with modems and communication programs.
  64.  
  65.   If you are an advanced user you can probably guess what most functions
  66.   are used for and settle for the quick reference at Alt-Z and the help
  67.   lines at the buttom line in the menus.
  68.  
  69.  ^hMouse^n
  70.  
  71.   The mouse system in Terminate provides some nice features and allows you to
  72.   move around easily in menus and even start downloading without touching the
  73.   keyboard.
  74.   You must have already installed a mouse driver, of course, eg: MOUSE.COM
  75.   v9.00 (MicroSoft) or LMOUSE.COM v6.10 (LogiTech) or similar.
  76.   Old mouse drivers may conflict with our communication driver - so if your
  77.   screen messes up, try turning off the mouse. If that does not work, then try
  78.   using another mouse driver. Old mouse drivers is also only able to support
  79.   80x25,80x43,80x50 and not all the extended like 100x40, 132x60 etc.
  80.  
  81.   In menus, pressing the left button will be the same as pressing return on
  82.   that line. The right button will simulate the escape key and will leave the
  83.   menu. In terminal mode, left button on an empty line will send a return
  84.   (Ascii 13). Right button on an empty line will send a space (Ascii 32)
  85.   Pressing on any character on the terminal screen, will send that character
  86.   exactly as if you typed it yourself. You do not have to position the cursor
  87.   directly - if you click on a blank place, Terminate will find the nearest
  88.   character on the screen and send that instead of the space.
  89.   The mouse can be turned on/off in the Toggles menu.
  90.  
  91.                                     Send 'F'
  92.                                     |
  93.   ScreenLine = '    M   Messages       F  Files          '
  94.                     |              |
  95.                     Send 'M'       Send 's'
  96.  
  97.   Pressing right button in the statusline will allow you to toggle between
  98.   3 different statusbars, allowing you to send all possible characters.
  99.   If you hold down one of the buttons, and mark a piece of the line, the
  100.   marked piece area will be sent by the modem; useful if a BBS program wants
  101.   you to type an areaname already shown on the screen!
  102.  
  103.  ^bSHIFT-ESC^n
  104.  
  105.   Pressing Shift-Esc will bring you to the Runtime information menu.
  106.   This menu can be called from all other menus and will give you all
  107.   kind of information. Like current drive. Last incoming characters.
  108.   Costs. Memory left etc. look for yourself.
  109.  
  110.  ^bAlt-A^n
  111.  
  112.   Calls the external editor. This could be Q.EXE (Qedit) or whatever editor
  113.   you might like to use.
  114.  
  115.  ^bAlt-B^n (^hShift-CursorUp^n)
  116.  
  117.   Scrollback buffer. Terminate will save the last incoming screen in a
  118.   special buffer. The size of this buffer can be set in the configuration
  119.   and you should decrease it if you are running short of memory. Both text
  120.   and colours are saved in this buffer.
  121.  
  122.  ^bAlt-C^n
  123.  
  124.   Clears screen, sets default colours and cleans up.
  125.  
  126.  ^bAlt-D^n
  127.  
  128.   The dialling directory. From here you can store all you 'phone numbers and
  129.   all kinds of other information. The phonebook also holds information on how
  130.   much your 'phone bill will be for up to one year.
  131.  
  132.  ^bAlt-E^n
  133.  
  134.   Echo all characters send to the modem on the screen. Normally this is
  135.   always turned off.
  136.  
  137.  ^bAlt-F^n
  138.  
  139.   The File Manager. Also calls external utilities and has almost every
  140.   function that Norton Commander(TM) has - and then a little more :-)
  141.  
  142.  ^bAlt-G^n
  143.  
  144.   Scripts will follow in later versions...
  145.  
  146.  ^bAlt-H^n
  147.  
  148.   Hangs up the 'phone. The hangup string is determined in the Modem &
  149.   Dialling Menu. You can also set a toggle so you will be asked to confirm
  150.   hangup, before actually hanging up.
  151.  
  152.  ^bAlt-I^n
  153.  
  154.   Screen image. Will save the current screen in the capture file (default is
  155.   TERMINAT.CAP). You can define other capture files for each phonebook entry
  156.   and the current capture file will always be used to save images.
  157.  
  158.  ^bAlt-J^n
  159.  
  160.   Calls COMMAND.COM (COMSPEC) and invokes a dos-shell. You can set Terminate
  161.   up to not swap out memory first. Type ^hEXIT^n to return.
  162.  
  163.  ^bAlt-K^n
  164.  
  165.   String grabber. Grabs any string and saves it in the history strings. You
  166.   can adjust the grab size by pressing Shift and move cursor keys right, left,
  167.   up or down. You can use this function EVERYWHERE in Terminate. So if you
  168.   call a system, and want to remember a phone number: Grab the number, go into
  169.   the phonebook, add a new entry, edit phone number, press cursor up and
  170.   recall the grabbed number. This should save you cluttering your desk with
  171.   thousands of small pieces of paper!
  172.  
  173.  ^bAlt-L^n
  174.  
  175.   Opens or closes the current capture file; the capture files can be defined
  176.   for each phonebook entry. If you define a capture file and call a system,
  177.   the capture file will be opened upon connection. You can turn the
  178.   auto-capture system off by pressing Alt-0 and toggle if off permanently.
  179.   You can also force Terminate to always overwrite old capture files by
  180.   turning on a toggle.
  181.  
  182.  ^bAlt-M^n
  183.  
  184.    ^m╒╡^t Miscellaneous functions ^m╞╕
  185.    │ ^nReset device/Init ^bm^nodem   ^m│
  186.    │ ^nSend ^ba^nuto-answer string   ^m│
  187.    ├───────────────────────────┤
  188.    │ ^b2^n5 lines                  ^m│
  189.    │ ^b4^n3/50 lines               ^m│
  190.    │ ^bS ^nTseng 4000    100x40    ^m│
  191.    │ ^bO ^nXGA           132x25    ^m│
  192.    │ ^bE ^nReset          80x25    ^m│
  193.    ├───────────────────────────┤
  194.    │ ^bH^nostmode                  ^m│
  195.    │ ^bC^nhoose char to send       ^m│
  196.    │ ^bR^nun Download Manager      ^m│
  197.    │ ^bL^nock keyboard             ^m│
  198.    │ ^bF^nax manager               ^m│
  199.    ╘═══════════════════════════╛
  200.  
  201.    ^bm^n  First reset device, then allows you to select which init
  202.       string to send to the modem
  203.    ^ba^n  Pick up phone (send the auto answer string)
  204.    ^b2^n  Switch to 25 lines screen mode
  205.    ^b4^n  If EGA, then switch to 43 lines; if VGA, then 50 lines
  206.    ^bS^n  Startup screen mode if using custom screen modes
  207.    ^bO^n  Another definable screen mode
  208.    ^bE^n  Mode to use when exiting Terminate and using custom mode
  209.    ^bH^n  Startup hostmode, look in configuration for more information
  210.       You can also start the hostmode directly: TERMINAT /HOST
  211.    ^bC^n  Choose a char from the ascii selector to send directly to port
  212.    ^bR^n  Run Download Manager
  213.    ^bL^n  Locks keyboard with password
  214.    ^bF^n  Fax manager, will be available soon
  215.  
  216.  ^bAlt-N^n
  217.  
  218.   Sends the user name from the current user profile. You will normally use
  219.   this function where Terminate can not log on automatically.
  220.  
  221.  ^bAlt-O^n
  222.  
  223.   All the configuration menus.
  224.  
  225.  ^bAlt-P^n
  226.  
  227.   Quick change of device, comport, baudrate, databits, parity, stopbit. You
  228.   can also save the chosen setup directly as the default startup settings.
  229.  
  230.  ^bAlt-Q^n
  231.  
  232.   Quits current autologin script. If you see a flashing ^h^fA^n in the
  233.   statusline then probably Terminate did not logon properly. Try correcting
  234.   the login scripts in the configuration menus or turn them off.
  235.  
  236.  ^bAlt-R^n
  237.  
  238.   Download Paths. Terminate has 3 download paths available. At startup,
  239.   number 1 will always be the default - but you can change this manually or
  240.   change it for each phone entry.
  241.  
  242.  ^bAlt-S^n
  243.  
  244.   Send password. If you have called a system, then the password from the
  245.   phonebook is sent. If that password entry is blank you will be asked to
  246.   either input a new password directly or send the default password from the
  247.   current userprofile.
  248.  
  249.  ^bAlt-T^n
  250.  
  251.   Change the current terminal emulation. The first one - called 'Avatar/0*
  252.   with Ansi-BBS fallback' - can be used on most systems to allow you to run
  253.   both Avatar and ANSI at the same time. Terminal emulations determine how
  254.   the control codes and colours are processed and displayed on your screen.
  255.  
  256.  ^bAlt-U^n
  257.  
  258.   System information (which multitasker, processor, graphics card, etc,).
  259.  
  260.  ^bAlt-V^n
  261.  
  262.   Enter a DOS command manually. You can turn off swapping in the
  263.   configuration if you don't want to swap first.
  264.  
  265.  ^bAlt-W^n
  266.  
  267.   Translation editor. Handles how characters are changed before they are sent
  268.   to the remote system or what to change before displaying the character on
  269.   the screen. This function is mostly used when calling Hosts or systems that
  270.   cannot handle 8-bit characters.
  271.  
  272.   ^m╒═══════════════════════════════════════════╡^t Translation editor ^m╞╕
  273.   │ ^nFilename :         .XLT                                         ^m│
  274.   │ ^bC^nomment  : ^hDefault translation tables for terminate             ^m│
  275.   │ ^b(  0)                                        ( Incoming table ) ^m│
  276.   │^h  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .  ^m│
  277.   │^h  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .  ^m│
  278.   │^h      !   "   #   $   %   &   '   (   )   *   +   ,   -   .   /  ^m│
  279.   │^h  0   1   2   3   4   5   6   7   8   9   :   ;   <   =   >   ?  ^m│
  280.   │^h  @   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O  ^m│
  281.   │^h  P   Q   R   S   T   U   V   W   X   Y   Z   [   \   ]   ^   _  ^m│
  282.   │^h  `   a   b   c   d   e   f   g   h   i   j   k   l   m   n   o  ^m│
  283.   │^h  p   q   r   s   t   u   v   w   x   y   z   {   |   }   ~     ^m│
  284.   │^h  Ç   ü   é   â   ä   à   å   ç   ê   ë   è   ï   î   ì   Ä   Å  ^m│
  285.   │^h  É   æ   Æ   ô   ö   ò   û   ù   ÿ   Ö   Ü   ¢   £   ¥   ₧   ƒ  ^m│
  286.   │^h  á   í   ó   ú   ñ   Ñ   ª   º   ¿   ⌐   ¬   ½   ¼   ¡   «   »  ^m│
  287.   │^h  ░   ▒   ▓   │   ┤   ╡   ╢   ╖   ╕   ╣   ║   ╗   ╝   ╜   ╛   ┐  ^m│
  288.   │^h  └   ┴   ┬   ├   ─   ┼   ╞   ╟   ╚   ╔   ╩   ╦   ╠   ═   ╬   ╧  ^m│
  289.   │^h  ╨   ╤   ╥   ╙   ╘   ╒   ╓   ╫   ╪   ┘   ┌   █   ▄   ▌   ▐   ▀  ^m│
  290.   │^h  α   ß   Γ   π   Σ   σ   µ   τ   Φ   Θ   Ω   δ   ∞   φ   ε   ∩  ^m│
  291.   │^h  ≡   ±   ≥   ≤   ⌠   ⌡   ÷   ≈   °   ∙   ·   √   ⁿ   ²   ■      ^m│
  292.   │                                                                 ^m│
  293.   │   ^bR ^nReset  ^bL ^nLoad  ^bS ^nSave  ^bT ^nIncoming/outgoing  ^bU ^nAscii/Value   ^m│
  294.   │                ^bX ^nTranslate a file using this table              ^m│
  295.   ╘═════════════════════════════════════════════════════════════════╛^n
  296.  
  297.   ^bC^nomment
  298.  
  299.    Since it is important to know what the table is used for it is
  300.    strongly advised that you enter the description here.
  301.  
  302.   ^bR ^nReset
  303.  
  304.    Remove all changes and clean the board.
  305.  
  306.   ^bL ^nLoad
  307.  
  308.    Load a table
  309.  
  310.   ^bS ^nSave
  311.  
  312.    Save table
  313.  
  314.   ^bT ^nIncoming/outgoing
  315.  
  316.    A table consists of an incoming and an outgoing table. The incoming
  317.    is when you receive something from the other end, then this table
  318.    will be used. The outgoing is when you send something.
  319.  
  320.   ^bU ^nAscii/Value
  321.  
  322.    Toggle values instead of character apperance.
  323.  
  324.   ^bX ^nTranslate a file using this table
  325.  
  326.    Translate a complete file using the current table. This can be used
  327.    if you have files from other non PC's (Amiga, MAC, etc)
  328.  
  329.  ^bAlt-Y^n
  330.  
  331.   Chat mode. If you are connected to another Terminate and press Alt-Y,
  332.   Terminate will send '**EMSI_CHTF5D4'+#13 to the other end. This is normally
  333.   used by IEMSI sessions, but a Terminate at the other end will change
  334.   automatically - even when NOT in IEMSI mode. When you press Alt-Y again to
  335.   exit chatmode the string '**EMSI_TCH3C60'+#13 will be sent to the other end
  336.   so both ends exit chat mode.
  337.   Chatmode works just like a terminal emulation so you can use all other
  338.   functions while you are chatting, including starting to up/download.
  339.  
  340.  ^bAlt-X^n
  341.  
  342.   Exit Terminate. A function you hopefully only will use once a day :-)
  343.   If you are online (Carrier detected) you will be asked what to do: E^h^fx^nit,
  344.   Hangup & exit, or Not exit. You can also turn on a toggle that will ask you
  345.   if you are sure you want to exit Terminate.
  346.  
  347.  ^bAlt-Z^n
  348.  
  349.   Quick reference menu. Here you can see a short description of all
  350.   functions - and see which functions are ^hOn^n or ^hOff^n.
  351.  
  352.  ^bAlt-=^n
  353.  
  354.   Load a keyboard table. This key is different on some international
  355.   keyboards. It is the key next to the ^hBACKSPACE^n. Hold down Alt and press
  356.   the = (the key to the left of the backspace).
  357.   Keyboards can be customized in the configuration. You can setup a default
  358.   keyboard for each terminal emulation, but you can also specify a keyboard
  359.   file to be loaded for each phonebook entry.
  360.  
  361.  ^bCtrl-End^n
  362.  
  363.   Will send a break to the other end. Breaks are rarely used anymore, but
  364.   Terminate will both detect and send breaks. A break is a condition in
  365.   which the data line is filled with zero bits for as long as it takes to
  366.   send one character. Some switchboards will need a break to hangup the line.
  367.   It can also be used to reset the buffers in your modem, if the modem has
  368.   been setup to act this way. If you are not an advanced user you will never
  369.   use this.
  370.  
  371.  ^bScrollLock^n
  372.  
  373.   Doorway mode. This is a special mode (originated by Marshall Dudley) to
  374.   allow you to send keyboard scan codes, instead of normal ascii characters.
  375.   The statusline will be removed so the entire screen can be used. If you
  376.   need to use a menu, you must first disable Doorway mode, use the menu and
  377.   then enable Doorway mode again. The reason is that when you press, for
  378.   example, Alt-O then the scancode for Alt-O is sent and the remote site can
  379.   use the Alt-O as if that key had been pressed at the remote site.
  380.   The technical idea behind this Doorway mode is quite simple: If normal
  381.   ascii character, then send character; else, if special key, send a Ascii 0,
  382.   send scancode.
  383.  
  384.  ^bPageDown^n
  385.  
  386.   Download. Here you can select which protocol you want to use for the file
  387.   transfer. Download means receive files. A file transfer protocol is a way
  388.   of sending/receiving data between the remote site and ourselves. Zmodem is
  389.   the best to use for normal users where it is available...
  390.  
  391.  ^bPageUp^n
  392.  
  393.   Upload. When you want to send a file to the remote site, you will have to
  394.   use a file transfer protocol. First you will be placed in the filemanager.
  395.   From here you can select a file or files (if the file-protocol allows batch
  396.   transfers, meaning more than 1 file at the time). Just press ^hRETURN^n on
  397.   the selected file then the transfer will start. If you are using a batch
  398.   protocol, lets say Zmodem, then you can select several files by marking
  399.   the files first. You can select files in both windows.
  400.  
  401.  ^hAlt-1..Alt-0 are toggles that can be set permanently in the configuration^n
  402.  
  403.  ^bAlt-1^n
  404.  
  405.   Turns beeps/alarms/alerts on/off
  406.  
  407.  ^bAlt-2^n
  408.  
  409.   Turns ANSI music on/off. If any remote sites have ANSI music it may be
  410.   played. Terminate supports full ANSI music. Pressing Alt-2 while music is
  411.   playing will reset the music buffer.
  412.  
  413.  ^bAlt-3^n
  414.  
  415.   Turn the statusline on/off. You can select in Emulation Setup not to have
  416.   the statusline, but since the statusline gives you important information
  417.   you should not need to turn it off.
  418.  
  419.  ^bAlt-4^n
  420.  
  421.   The usage log is normally always turned on at startup, so you can later
  422.   see where you have called and which files you have downloaded. But you can
  423.   turn it off here, if there is a reason for not having something logged.
  424.  
  425.  ^bAlt-5^n
  426.  
  427.   You can add a linefeed (#10) when Terminate receives a carriage return
  428.   (#13). This is normally not used and should be turned off as the default.
  429.  
  430.  ^bAlt-6^n
  431.  
  432.   Turn on/off IEMSI logins. IEMSI logins will allow you to fast login to
  433.   systems that supports IEMSI (RemoteAccess, SuperBBS, Maximus, EzyCom). You
  434.   can setup options to rescan files, clear screen, etc, before calling the
  435.   system. Look in the Users/IEMSI setup for more information.
  436.  
  437.  ^bAlt-7^n
  438.  
  439.   Toggle if you want the statusline to show information about CTRL-keys. This
  440.   can be turned off if you think it annoying that it changes all the time
  441.   (eg. if you use the CTRL key a lot in terminal mode.) You can also turn this
  442.   off in the configuration.
  443.  
  444.  ^bAlt-8^n
  445.  
  446.   Turn on/off information in statusline about the Alt-F1..Alt-F10 keys -
  447.   although there is normally no reason for turning this off.
  448.  
  449.  ^bAlt-9^n
  450.  
  451.   Turns on/off information about the keys Ctrl-Shift-F1..F10. This will show
  452.   you the abbreviated status of your external utilities. There is no reason
  453.   to turn this off.
  454.  
  455.  ^bAlt-0^n
  456.  
  457.   Auto capture on/off. If you have defined a capture file for the phonebook
  458.   entry you have dialled, the capture file will be opened automatically at
  459.   connect. If you don't want to capture anything you can turn this off.
  460.  
  461.  ^bAlt-F1^n
  462.  
  463.   Will toggle the information in the statusline to the left. The startup
  464.   setting and how to change on connect can be setup in configuration. It has
  465.   3 states:
  466.  
  467.    ^hAlt-Z for help^n                 just Help Information.
  468.  
  469.    ^hdsrdtr cd sdrd ctsrtsri^n        Modem lights: capital letters mean
  470.                                   that the line is high. If cd is in
  471.                                   big letters:'CD', then carrier detect
  472.                                   on the modem is high (red/on).
  473.  
  474.    ^hSystem Name^n                    Name of the system called or `Manual' if
  475.                                   connection was not made via the dialer.
  476.  
  477.  ^bAlt-F2^n
  478.  
  479.   Will toggle the information in the statusline to the right.
  480.   The startup setting and how to change on connect can be setup in
  481.   configuration. It has 4 states:
  482.  
  483.    ^hTime^n                           Current local time
  484.  
  485.    ^hOnline time^n                    Online time in mm:ss format
  486.  
  487.    ^hCosts^n                          How much money you have used this call
  488.  
  489.    ^hOnline time^n                    Online time in hh:mm format
  490.  
  491.  ^bAlt-F3^n
  492.  
  493.   Pause. Many systems will log you off if you don't do anything for 2-3
  494.   minutes. This function will allow you to send a predefined character every
  495.   x seconds, to make the system at the other end think you are active. The
  496.   default is to send a RETURN (ascii 13) every 30 seconds. This is useful if
  497.   the doorbell rings and you have just connected to a very busy system, which
  498.   would take hours to get back on to, if you didn't have Terminate.
  499.  
  500.  ^bAlt-F4^n
  501.  
  502.   Will show you the same information as you see just right after an IEMSI
  503.   connection. It will tell you exactly which BBS system and version number
  504.   the remote is running. Also the system name, sysop name, location and what
  505.   the local time is at the remote location.
  506.  
  507.  ^bAlt-F5^n
  508.  
  509.   File tagger. This function will identify possible filenames anywhere on the
  510.   screen. You can tag the files you want to download so you don't need to
  511.   write them down on paper. You can also use the scrollback buffer ^hAlt-B^n
  512.   and tag files from there.
  513.  
  514.  ^bAlt-F6^n
  515.  
  516.   Tagmenu. When you have tagged some files, and selected a protocol at the
  517.   remote site, then you will normally be asked which files to download.
  518.   The tagmenu will have stored all the files you want and will then send the
  519.   filenames, so you will not have to do this manually. The tagmenu has many,
  520.   many more functions such as tagging from file lists.
  521.  
  522.  ^bAlt-F7^n
  523.  
  524.   Point system. The point system is a system were you can send/get mail or
  525.   files. It can connect to any other program using a mailer that has EMSI.
  526.   At the present time: Frontdoor, d'Bridge, Binkley, Portal of Power etc.
  527.   Note that you will not actually get online to the system, but only connect
  528.   to the remote mail system. From here you can ^hrequest^n files from
  529.   that system, without even getting online. You can also write a netmail
  530.   directly to sysops. But please, refer to the point manual for more.
  531.  
  532.  ^bAlt-F8^n
  533.  
  534.   System searcher. Sometimes it is useful to test an entire BBS-list to
  535.   check which systems that is still online. With this function you can
  536.   create a file with a phonenumber on each line and call all these systems.
  537.   Terminate will then log all received information and you can watch this
  538.   later. This function is especially good the BBS-editors, that can use
  539.   this function to check which systems to remove from the list.
  540.  
  541.  ^bAlt-F9^n
  542.  
  543.   History strings.
  544.   Here you can edit or send old strings to the modem. Every time you edit
  545.   a string anywhere in Terminate, the last string will be saved and you can
  546.   recall old strings in an input field, by pressing Cursor Up/Down.
  547.   RETURN will edit the strings, and SPACE will send the string to the modem.
  548.   Here also the description for files is saved when uploading and a FILES.BBS
  549.   /DESCRIPT.ION file exist. You can also save and load the last 16 history
  550.   strings. If you have a FILES.BBS/DESCRIPT.ION file in the same directory as
  551.   the files, Terminate can find the description and import from the line
  552.   where the description for the file is found and the subsequent 16 lines
  553.   (Only FILES.BBS and in case of several description lines). When pressing
  554.   ^bI^n, the filemanager will be called, just find the file and press ^hESC^n
  555.   with the cursor positioned above the filename.
  556.  
  557.  ^bAlt-F10^n
  558.  
  559.   CD Audio player. If you have an audio CD-ROM, and have installed MSCDEX
  560.   (Microsoft CD Extension). Then you will be able to play normal music CD's.
  561.   You can view the start and length of every track on the CD.
  562.  
  563.  ^hNETWORK^n
  564.  
  565.   To use Terminate on a network drive you must set the file to be shareable.
  566.   With Novell you can use the FLAG command.  ^hFLAG TERMINAT.EXE srw^n, then
  567.   the file will be set to shareable.
  568.   On networks that do not support sharing directly (eg Lantastic), you
  569.   must load SHARE.EXE on the server ONLY. A lot of people think they must
  570.   load SHARE.EXE on the work stations also. But this is a mistake!!!!
  571.   SHARE.EXE should only be loaded on machines that allow others to access the
  572.   hard disk. So if you have a workstation that only accesses the server, you
  573.   should NEVER waste memory on loading SHARE.EXE. Unfortunately a lot of
  574.   programmers has misunderstood this idea and demand that SHARE is present.
  575.  
  576.   The only problems that occur when running Terminate from several stations
  577.   at one time is that you cannot write to the same logfile and use the same
  578.   swapfile. This can be helped by either turning the logfile off or setting
  579.   an environment variable in your AUTOEXEC.BAT like this:
  580.  
  581.   SET NET=1
  582.  
  583.   Then define TERMINA%NET%.LOG. When opening the logfile TERMINA1.LOG
  584.   will be used. If SET NET=2 then TERMINA2.LOG etc. will be used.
  585.   Note that Terminate will always replace environment variables with the
  586.   correct values. The same goes for the swapfile.
  587.  
  588.   You can also use different configuration files using this system.
  589.  
  590.   TERMINAT /C:TERMINA%NET%.CFG
  591.  
  592.   Then TERMINA1.CFG will be used for this station, if SET NET=2 then
  593.   TERMINA2.CFG will be used. If you are a network administrator then I bet
  594.   you have had these problems with configuration files many times before,
  595.   but this should solve any problems that you might get.
  596.  
  597.